Duratec Surface Primer The ultimate High-Gloss surface primer for wood, MDF, tooling board and composite plugs, patterns and models. Unique air-cure technology for fast cure even with thin coats. Easy to sand, polish to a gloss. Take a mold directly off the Surface Primer or topcoat for the highest gloss.
Recommended Uses:
Surface coat for plugs / patterns for composite tooling.
Easy Sanding High-Build Primer for composite parts.
High Build, Fast Sanding Primer perfectly smooth surfaces
A substitute for sanding gelcoat - epoxy laminates or pinhole-free surfaces.
Highly crosslinked coating providing excellent chemical resistance
Features:
Low Porosity- provides a super fine leveling and filling system. Applied properly, Surface Primer provides a porosity-free surface without pinholes or defects.
Adhesion to most epoxies- with heat distortion level of 200° F/93 C the primer also adheres to fiberglass, wood, MDF, brick, concrete and polyurethane foam.
Rapid Buildup- up to 40 mils 1000 micorns, wet on wet, on composite plugs and master mold surfaces. Save time and labor.
Easy Sanding-also saves time and labor. The primer cures to a surface that polishes to a gloss.