CHANGE-A-LOCK®, Logo

Orange, California       TOLL FREE     
(866) 546-2957

Established 1978

American Flag

Made in the USA

Shop by Category

22. YALE® & Tru-Bolt® (5 Pin) Rekey Kit

SKU: # 1000 $12.95
The $12.95 YALE® & Tru-Bolt® Rekey Kit by CHANGE-A-LOCK® is a (5 pin system) for the Yale® & Tru-Bolt® locks which uses a Kwikset® type key cylinder. NOTE: Your YALE or TRU-BOLT KEY must be able to go into a KWIKSET LOCK KEY CYLINDER for this rekey kit to work! The rekey kit contains everything necessary (except for a common screwdriver) to rekey 6 six single cylinders locks for Entrance, Lever Entrance, Single & Double cylinder Deadbolts, and Handlesets type locks. The kit will rekey 6 single cylinder locks. Each lock you put a key in is a single cylinder. A deadbolt keyed on both sides would count as 2 single cylinder locks.If you buy 2 or more rekey kits and want them keyed the same please email me at david@changealock.com

EACH KIT CONTAINS: Two precut keys, 6 sets of color coded pins (not exceeding six (6) total single cylinders), detailed step-by-step instructions in both ENGLISH & SPANISH, and all specialty tools needed to rekey lock.

NOTE: To order EXTRA PIN SETS and/or EXTRA KEYS for your rekey kit please click on the desired rekey product list on the left part of this page. All you may need is a common screwdriver to remove lock from door. This rekeying kit is to be used only with YALE® & Tru-Bolt® type locks; however, this rekey kit is not for the YALE FORTITUDE® (5 pin key cylinder) and/or the YALE Y/H COLLECTION® (6 key pin cylinder) TYPE LOCKS. This rekey kit is not designed to work with other manufacturer's type locks.

Note: You must use the keys provided in rekey kit for rekeying. Pins match keys in kit and are not to be used to rekey with any other keys!

NOTE: OLD KEY is needed to take out cylinder plug then new key is used to rekey lock. Old keys can not be used to rekey locks using the CHANGE-A-LOCK® rekey kit for the cylinder pins will not work with old key. YALE® LOCKS must have the KWIKSET® KEY compatible cylinder for rekey kit to work!

ALERT: WHAT TO DO IF KEY CAN NOT BE REMOVED AFTER LOCK HAS BEEN RE-KEYED. If your key cylinder has a screw-off end cap, tighten or loosen one or two notches at a time until you are able to remove key. If this does not work or if your lock cylinder does not have a screw-off end cap then refer to master keyed locks below.

MASTER KEYED LOCK:

Your lock may have been master keyed at one time. If key can not be removed once lock has been rekeyed, then remove the key cylinder again using the follower. Remove the follower to let the top pins and springs drop out of cylinder housing. If lock has been master keyed you will have more than 5 top pins for a 5 pin cylinder lock system. Refer to the directions on how to replace the 5 top pins of equal length and the 5 springs. Do not use the other pins which drop out of the cylinder housing!

If you have a 6 pin key cylinder system then replace the 6 pins of equal length and the 6 springs. For this rekey kit to work you will need to drop the 6th pin and spring from the top cylinder which is where the tip of the key is in the key cylinder

Privacy Notice:

CHANGE-A-LOCK.com will not share, sell, or otherwise disclose any of your personal or financial information with outside parties for any reason. All information you provide on this web site will be used by CHANGE-A-LOCK.com for the sole purpose of customer service and/or fulfillment of your order. We do not partner with any other businesses.  CHANGE-A-LOCK Guarantees your Privacy!

CHANGE-A-LOCK® never sells or discloses personal information to third party companies.