The $12.95 WESLOCK® (5-pin key cylinder system) Rekey Kit, by CHANGE-A-LOCK®, contains everything necessary (except for the common screwdriver) to rekey Entrance, Single & Double cylinder Deadbolts, and Handleset type locks except for a common screwdriver. The kit will rekey 6 single cylinder locks. Each lock you put a key in is a single cylinder. A deadbolt keyed on both sides would count as 2 single cylinder locks.

EACH KIT CONTAINS: Two precut keys, 6 sets of color coded pins for rekeying single and/or double cylinder type locks, detailed step-by-step instructions both in ENGLISH & SPANISH, and all specialty tools needed to rekey lock. To order EXTRA PIN SETS and/or EXTRA KEYS for your rekey kit please click on the desired rekey product list. All you may need is a common screwdriver to remove lock from door. This rekeying kit is to be used only with WESLOCK® type locks. Kit is not designed to work with any other manufacturer's type locks. Weslock® rekey kit does not include instructions for WESLOCK® KEYED LEVER ENTRANCE lock.

NOTE: OLD KEY is needed to take out cylinder plug then new key is used to rekey lock. Old keys can not be used to rekey locks using the CHANGE-A-LOCK® rekey kit for the cylinder pins will not work with old key.

ALERT: WHAT TO DO IF KEY CAN NOT BE REMOVED AFTER LOCK HAS BEEN RE-KEYED. If your key cylinder has a screw-off end cap, tighten or loosen one or two notches at a time until you are able to remove key. If this does not work or if your lock cylinder does not have a screw-off end cap then refer to master keyed locks below.

MASTER KEYED LOCK:

Your lock may have been master keyed at one time. If key can not be removed once lock has been rekeyed, then remove the key cylinder again using the follower. Remove the follower to let the top pins and springs drop out of cylinder housing. If lock has been master keyed you will have more than 5 top pins for a 5 pin cylinder lock system. Refer to the directions on how to replace the 5 top pins of equal length and the 5 springs. Do not use the other pins which drop out of the cylinder housing!

If you have a 6 pin key cylinder system then replace the 6 pins of equal length and the 6 springs.