airspillcom
 Environmental Science Store
1-800-292-0921  fax 978-342-5065
 
wek@airspill.com
Custom Search

 

Carbon Dioxide Monitors


AirSense
Model 310
Carbon Dioxide Sensor
 
Model 301A-1
Carbon Dioxide
Detector

  • Lowest long-term drift available
  • Smaller size in sleek new case
  • New more-stable IR source
  • Foolproof power hookup
  • Digital electronics
  • User-friendly service
  • Unique auto-zero function
  • Unprecedented 1-year warranty
  • Calibrate only once in two years
  • One calibration gas instead of two
  • Diffusion or duct sampling options
  • Relay option available

Office buildings, schools, hospitals, apartment buildings, churches and synagogues, homes, any place where a large number of people (or animals or plants) are present can have elevated levels of carbon dioxide (CO2). Headaches, irritability, fatigue, difficulty in breathing, increase in the breathing rate and/or pulse rate, sweating, shortness of breath, and a feeling of "stuffiness" are common symptoms of breathing air with higher than normal CO2 levels. Our Model 300 Series Carbon Dioxide monitors are the easiest way to continuously check CO2 levels and provide data to maintenance personnel in order to adjust HVAC ventilation rates, make occupants of buildings more comfortable and supply healthy fresh air. The 300 Series units can be used immediately, right out of the box, to help you meet OSHA's Indoor Air Quality (IAQ) standards and American Society of Heating, Refrigerating, and Air Conditioning Engineer's (ASHRE's) ventilation standards. Occupants and building management both benefit. Improve the indoor air quality in your facility with the help of the economical 300 Series Carbon Dioxide Monitors. Together with one of our Kidde Nighthawk digital readout carbon monoxide alarms you can economically and accurately monitor two of the most common indoor air contaminants in your indoor environments.
 
Housed in a sleek new case, our new generation Model 310 is the first choice for building ventilation system professionals. With an unprecedented 1 year warranty and only one cal gas required for calibration (rather than zero and cal gas) the 310 is the user-friendly CO2 monitor you need.
 
The 310 and the 301A are the cutting edge of infrared technology: Excellent long-term drift performance is enhanced by a new, improved, more stable IR source, a new state-of-the-art lithium tantalate detector, updated digital electronics and unique auto-zero function. This results in very stable calibration and longer trouble-free operation in the field. The new IR source is more rugged, operates at 10X derated power and has a life expectancy of at least 15 years (and its own five year warranty). The new lithium tantalate detector enhances stability, has less ambient temperature sensitivity, and faster response time.
 
Fail-safe design means the electronics cannot be damaged if the power is accidentally hooked to the wrong terminals. Each unit is electronically isolated so that multiple units can be connected to the same controller without electronic interference.
 
The 300 Series units are extremely versatile, with digital display, and 115 V. power options available. The units have both voltage and 4-20mA outputs. The new smaller size with power consumption as low as 60 mA and .8W make it ideal for battery-operated portable applications.
 
Patents are pending.

SPECIFICATIONS
Operating Principal: Non-dispersive Infrared (NDIR)
Gas Sampling Method: Diffusion
Measurement Range: 0-2000 ppm CO2 (0-5000 option - 301)
Maximum Annual Drift: +/- 75 ppm
Accuracy: +/- 5% or 75 ppm: whichever is greater
Repeatability: +/- 20 ppm
Minimum Calibration Interval: Two years
Response Time: Less than one minute
Operating Temperature Range: 0-50 Degrees Centigrade
Power Requirements: 18-30 VDC or 20-30 V RMS AC
Power Consumption: Less than 1 W
Calibration Adjustments: Span only (Offset electronically nulled)
Case Dimensions: 4.9" x 2.6" x 1.6" (301) 5.25" x 3.25" x 1.4" (310)
Enclosure Material: High impact plastic
Voltage Output (linear): 0-10 VDC and 4-20mA standard (other ranges available)
Optional Digital Display: 4 Digit, .3" LED
Operating Life Expectancy: 15 Years minimum
Warranty: 1 year, parts and labor/repair or exch.
Recommended Calibration Interval: 5 years (310)
 

Grid | List (1 to 6 of 14) « Prev | Next »
(A1) AirSense Carbon Dioxide Sensor - Part #: 310LT; LCD Display, No Relay. 120 v. transformer w/USA plug

(A1) AirSense Carbon Dioxide Sensor - Part #: 310LT; LCD Display, No Relay. 120 v. transformer w/USA plug

AirSense Carbon Dioxide Sensor - Part #: 310LT; LCD Display, No Relay, 120 volt transformer w/USA plug, 0-2000 ppm range, infra red detector.
$325.00
(A2) AirSense Carbon Dioxide Sensor - Part #: 310LRT; LCD Display, Relay Included

(A2) AirSense Carbon Dioxide Sensor - Part #: 310LRT; LCD Display, Relay Included

AirSense Carbon Dioxide Sensor - Part #: 310LRT; LCD Display, Relay Included, 120 volt transformer w/USA plug, 0-2000 ppm range, infra red detector.
$355.00
(A3) AirSense Carbon Dioxide Sensor - Part #: 310B

(A3) AirSense Carbon Dioxide Sensor - Part #: 310B

AirSense Carbon Dioxide Sensor - Part #: 310B
$325.00
(A4) AirSense Carbon Dioxide Sensor - Part #: 310BR; No LCD Display, Relay Included

(A4) AirSense Carbon Dioxide Sensor - Part #: 310BR; No LCD Display, Relay Included

AirSense Carbon Dioxide Sensor - Part #: 310BR; No LCD Display, Relay Included
$345.00
(A5) AirSense Carbon Dioxide Sensor - Part #: 310DK-2; Duct Sampling Kit

(A5) AirSense Carbon Dioxide Sensor - Part #: 310DK-2; Duct Sampling Kit

AirSense Carbon Dioxide Sensor - Part #: 310DK-2; Duct Sampling Kit
$65.00
(A6) AirSense Carbon Dioxide Sensor - Part #: 310CK; Calibration Kit

(A6) AirSense Carbon Dioxide Sensor - Part #: 310CK; Calibration Kit

AirSense Carbon Dioxide Sensor - Part #: 310CK; Calibration Kit
$225.00
Grid | List (1 to 6 of 14) « Prev | Next »


airspillcom

Environmental Science Store
 
1-800-292-0921  fax 978-342-5065
For more information, e-mail us at:  wek@airspill.com